tk5000 signal isolator -尊龙登录



tk5000 signal isolator

http://www.ahdqjt.com     time: 11/26/10 15:57

general description
tk5000 signal isolator is a card-mounted instrument of modular structure. it converts the 4 ~ 20ma dc c(or 1~5v dc)signals to the isolated 4 ~ 20madc (or 1 ~ 5v dc) signal output, which is supplied to indicator, recorder, analog regulator, programmable single / multiple loop digital controller, industrial process controller and distributed systems, so that they form variety of monitoring and control system. the power supply, input and output of the processor are isolated from each other, and the processor is an indispensable instrument forming non-explosion proof automatic control system.

main technical parameters
input: 4~20ma dc(or 1~5v dc)
output: 4~20ma dc or 1~5v dc
input resistance:> 500kω (when input is 1 ~ 5v dc);> 50ω (when input is 4 ~ 20ma dc)
output resistance: 500ω (when output is 1 ~ 5v dc);> 500kω (when output is 4 ~ 20ma dc)
load resistance: ≤ 350ω (when output is 4 ~ 20 ma dc); special load
when ordering, mark 250 ~ 750ω, 250 ~ 600ω, etc.
accuracy:±0.2%
common-mode interference: <5mv when 50hz
response time: <1s
isolation: input, output, power supply isolated from each other
zero adjustment: zero potentiometer
adjustment range: span potentiometer
power supplier:24vdc±10%
power consumption:<1.5w
ambient temperature:0~50℃
relative temperature:<90%rh(no condensation)
insulation resistance: ≥ 100mω among current, input and output terminal
dielectric strength: 1000v dc / min among power supply, input and output terminals
weight: about 150g
maintenance: under the condition of wiring, the instrument can be replaced

 



instrument selection


type

input signal

output signal

channels

tk5041

4~20ma dc

4~20ma/1~5v dc

single

tk5042

4~20ma dc

4~20ma/1~5v dc

double

tk5043

4~20ma dc

4~20ma/1~5v dc

one entrance ,two exit

tk5044

1~5v dc

4~20ma/1~5v dc

single

tk5045

1~5v dc

4~20ma/1~5v dc

double


网站地图